Quarkyonic Matter and Chiral Spirals

The nuclear matter, deconfined quark matter, and Quarkyonic matter in low temperature region are classified based on the 1/Nc expansion. The chiral symmetry in the Quarkyonic matter is investigated by taking into account condensations of chiral particle-hole pairs. It is argued that the chiral symmetry and parity are locally violated by the formation of chiral spirals, < psibar exp(2 i mu z gamma^0 gamma^z) psi >. An extension to multiple chiral spirals is also briefly discussed.Comment: Prepared for Hot Quark 2010, 4 page

Investigation of rotor blade element airloads for a teetering rotor in the blade stall regime (second wind tunnel test)

A test was conducted in the NASA-Ames 7 x 10 ft low speed wind tunnel on a seven-foot diameter model of a teetering rotor. The objectives of the test were: (1) acquire pressure data for correlation with laser and flow visualization measurements; (2) explore rotor propulsive force limits by varying the advance ratio at constant lift and propulsive force coefficients; (3) obtain additional data to define the differences between teetering and articulated rotors; and (4) verify the acceleration sensitivity of experimental transducers. Results are presented

Investigation of rotor blade element airloads for a teetering rotor in the blade stall regime

A model of a teetering rotor was tested in a low speed wind tunnel. Blade element airloads measured on an articulated model rotor were compared with the teetering rotor and showed that the teetering rotor is subjected to less extensive flow separation. Retreating blade stall was studied. Results show that stall, under the influence of unsteady aerodynamic effects, consists of four separate stall events, each associated with a vortex shed from the leading edge and sweeping over the upper surface of the rotor blade. Current rotor performance prediction methodology was evaluated through computer simulation

Comparative study of ordered and disordered Y1-xSrxCoO3-d

We have succeeded in preparing A-site ordered- and disordered-Y1/4Sr3/4CoO3-d with various oxygen deficiencies delta, and have made comparative study of their structural and physical properties. In the A-site ordered structure, oxygen vacancies order, and d = 0.34 sample shows a weak ferromagnetic transition beyond 300 K. On the other hand, in the A-site disordered structure, no oxygen vacancy ordering is observed, and d = 0.16 sample shows a ferromagnetic metallic transition around 150 K. A-site disordering destroys the orderings of oxygen-vacancies and orbitals, leading to the strong modification of the electronic phases.Comment: 3 pages, 3 figures, proceeding of 52nd Mangetism and Magnetic Materials Conference (MMM 2007), published in Journal of Applied Physic

Are You Tampering With My Data?

We propose a novel approach towards adversarial attacks on neural networks (NN), focusing on tampering the data used for training instead of generating attacks on trained models. Our network-agnostic method creates a backdoor during training which can be exploited at test time to force a neural network to exhibit abnormal behaviour. We demonstrate on two widely used datasets (CIFAR-10 and SVHN) that a universal modification of just one pixel per image for all the images of a class in the training set is enough to corrupt the training procedure of several state-of-the-art deep neural networks causing the networks to misclassify any images to which the modification is applied. Our aim is to bring to the attention of the machine learning community, the possibility that even learning-based methods that are personally trained on public datasets can be subject to attacks by a skillful adversary.Comment: 18 page

Flap survey test of a combined surface blowing model: Flow measurements at static flow conditions

The Combined Surface Blowing (CSB) V/STOL lift/propulsion system consists of a blown flap system which deflects the exhaust from a turbojet engine over a system of flaps deployed at the trailing edge of the wing. Flow measurements consisting of velocity measurements using split film probes and total measure surveys using a miniature Kiel probe were made at control stations along the flap systems at two spanwise stations, the centerline of the nozzle and 60 percent of the nozzle span outboard of the centerline. Surface pressure measurements were made in the wing cove and the upper surface of the first flap element. The test showed a significant flow separation in the wing cove. The extent of the separation is so large that the flow into the first flap takes place only at the leading edge of the flap. The velocity profile measurements indicate that large spanwise (3 dimensional) flow may exist

Current commands for high-efficiency torque control of DC shunt motor

The current commands for a high-efficiency torque control of a DC shunt motor are described. In the proposed control method, the effect of a magnetic saturation and an armature reaction are taken into account by representing the coefficients of an electromotive force and a torque as a function of the field current, the armature current and the revolving speed. The current commands at which the loss of the motor drive system becomes a minimum are calculated as an optimal problem. The proposed control technique of a motor is implemented on the microprocessor-based control system. The effect of the consideration of the magnetic saturation and the armature reaction on the produced torque and the minimisation of the loss are discussed analytically and experimentally </p

Obrechkoff versus super-implicit methods for the solution of first- and second-order initial value problems

AbstractThis paper discusses the numerical solution of first-order initial value problems and a special class of second-order ones (those not containing first derivative). Two classes of methods are discussed, super-implicit and Obrechkoff. We will show equivalence of super-implicit and Obrechkoff schemes. The advantage of Obrechkoff methods is that they are high-order one-step methods and thus will not require additional starting values. On the other hand, they will require higher derivatives of the right-hand side. In case the right-hand side is complex, we may prefer super-implicit methods. The disadvantage of super-implicit methods is that they, in general, have a larger error constant. To get the same error constant we require one or more extra future values. We can use these extra values to increase the order of the method instead of decreasing the error constant. One numerical example shows that the super-implicit methods are more accurate than the Obrechkoff schemes of the same order

Application of photodiodes to the detection of electromagnetic bursts

A new type of photodiode + scintillator (1 m2 x 1 cm) detector is developed to detect the large electro-magnetic burst under an EX-chamber. The threshold burst size is found to be 4.3 x 10 the 5 particles at the center of the scintillator. Therefore a gamma-ray family of 10 TeV is detectable by it, when it is set under 14 r.1. of iron. In addition, a very fast (2.4 nsec width) and very bright (correspond to 10 to the 6 particles) scintillation pulse has become avarable for this study

Cosmic Ray in the Northern Hemisphere: Results from the Telescope Array Experiment

The Telescope Array (TA) is the largest ultrahigh energy (UHE) cosmic ray observatory in the northern hemisphere TA is a hybrid experiment with a unique combination of fluorescence detectors and a stand-alone surface array of scintillation counters. We will present the spectrum measured by the surface array alone, along with those measured by the fluorescence detectors in monocular, hybrid, and stereo mode. The composition results from stereo TA data will be discussed. Our report will also include results from the search for correlations between the pointing directions of cosmic rays, seen by the TA surface array, with active galactic nuclei.Comment: 8 pages 11 figure, Proceedings of the APS Division of Particle and Fields (DPF) Meeting, Aug 2011, Brown University, Providence, RI, US